Showing all 20 results

Show sidebar
Close

Top or Bottom Door Patch

N/A out of 5
CAD $62.47CAD $74.98

Top/Bottom door patch (less insert) features a high-density cast body. It will allow you to use the same fitting for either top or bottom by simply installing the appropriate insert.

Close

Transom Patch Wall Bracket

N/A out of 5
CAD $16.73

Transom Patch Wall Bracket replaces the standard wall mounting plate supplied with the CDPH34BS, and is concealed on the hinge side when the door is installed.

Close

Mounted Transom Patch, External Corner Installation

N/A out of 5
CAD $111.93

Suitable for corner top pivot installation.

Mounted transom patch for installation on glass panels, creating the glass closure for the external corner. Can be used with several kinds of adapters, according to the frameless glass panel layout to be created. Suitable for various thicknesses of glass.

Close

Sidelite Mounted Transom Patch

N/A out of 5
CAD $103.76

To connect lateral panels

Sidelite mounted transom patch to keep lateral glass panels in place in a glass partition. Suitable for various glass thicknesses.

Close

Mounted Transom Patch, Left Corner Installation

N/A out of 5
CAD $203.08

Suitable for top left pivot point installation

Mounted transom patch for installation on fixed glass panels, creating the glass closure for the internal corner. Can be used with several kinds of adapters, according to the frameless glass door layout to be created. Suitable for various thicknesses of glass.

-20%
Close

Hydraulic Self-Closing Bottom Pivot Patch-Fitting Hinge

N/A out of 5
CAD $238.09CAD $274.72

Hold-open 90°

This hydraulic floor hinge include a multi adjustable mounting plate, two valves adjustment for closing speed. The open angle is 140° maximum

-20%
Close

Mounted Transom Patch, Right Corner Installation

N/A out of 5
CAD $203.08 CAD $162.46

Suitable for top right pivot point installation

Mounted transom patch for installation on fixed glass panels, creating the glass closure for the internal corner. Can be used with several kinds of adapters, according to the frameless glass door layout to be created. Suitable for various thicknesses of glass.

Close

Wall Mounted Transom Patch

N/A out of 5
CAD $159.17CAD $162.21

Wall mounted transom patch used to support a transom from a side jamb.

Close

Patch Lock Base and Cover

N/A out of 5
CAD $90.77CAD $511.30

Strike included

This patch lock can be mounted on the top, bottom or sides of doors.

Close

Mounted Transom Patch for Wall Mount

N/A out of 5
CAD $81.40

Suitable for top pivot point installation

Mounted transom patch to connect the crosspiece of a lateral glass panel. Can be used with several kinds of adapters, according to the frameless glass door layout to be created.

Close

Universal Patch Fitting

N/A out of 5
CAD $70.21

Suitable for superior pivot point installation.

Universal patch fitting that can adapt to any need with the right insert. Can be used with several kinds of adapters, according to the glass partition layout to be created. Suitable for various thicknesses of glass.

Close

Sidelite Mounted Transom Patch

N/A out of 5
CAD $103.66CAD $142.62

With Reversible Stop

Sidelite Mounted Transom Patch Connector with Reversible Door Stop is used to connect a sidelite and transom together.

Close

Transom Mounted Connector

N/A out of 5
CAD $124.42CAD $208.83

With Two Reversible Stops

Sidelite Mounted Transom Patch Connector with Reversible Door Stop is used to connect a sidelite and transom together. It is usually used on the strike or swinging side of the door. By simply turning the Reversible Door Stop around, you have the choice of making the door swing in or out.

Close

Glass Mounted Dead Throw Center Door Lock

N/A out of 5
CAD $223.05

This Low Profile Center Lock looks great when used with low profile door rails. Size: 2-3/4" x 5-5/8" (70 x 143 mm). The sleek housing uses our standard thumbturns and keyed cylinders in any combination (ordered separately). Fits both 3/8" (10 mm) and 1/2" (12 mm) thick tempered glass. Includes a 777SP Series Fixed Jamb Strike Plate. For locking to a glass sidelite, a Glass Keeper must be ordered separately.

Close

Top Door Patch Fitting

N/A out of 5
CAD $151.47

With round insert CD1NT303

The Top Door Patch Fitting includes the CD1NT303 Insert for use with our Top Walking Beam Pivot, CD1NT401 Surface Mount Top Pivot, CD1NT405 Threaded Top Pivot, or other 19/32" (15 mm) diameter type pivots. Fits in the upper corner of the gate's glass panel, and requires a hole and cut-out in the glass. Gaskets are supplied that allow this patch fitting to be used with either 3/8 or 1/2" (10 or 12 mm) glass and 2-3/4" (70 mm) Pivot Setback.

Close

Bottom Door Patch Fitting

N/A out of 5
CAD $153.78CAD $159.66

With Rectangular Insert CD1NT301

The Bottom Door Patch Fitting includes the insert for use with tapered style spindle floor closers or Free Swing Pivots. Covers are available in four standard finishes. Gaskets are supplied that allow this patch fitting to be used with either 3/8 or 1/2 inch (10 or 12 mm) glass.

Close

Sidelite Mounted Transom Patch

N/A out of 5
CAD $170.08CAD $283.95

With Insert CD1NT300

The Sidelite Mounted Transom Patch is used to support a transom from a sidelite glass panel. It comes with a CD1NT300 Insert for mounting a door with CDPH20A or CDPH21A Top Door Patch Fitting. The insert can also be moved on the non-hinged side, allowing for a double swing door. A CD1NT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a CD1NT305 Transom Patch Keeper Insert can be installed for use with an CDAMR205 Lock when used for top of the door installation.

Close

Top Pivot

N/A out of 5
CAD $81.53

Transom Suspension Plate for Upper Corner

Transom plate for mounting on glass door creating a junction, by the upper level, between the crossbar and the glass door. Allows the installation of glass doors without frame and applies to the upper part of the door.

Close

Heavy-duty Floor Bearing Pivot with Cover Plate

N/A out of 5
CAD $39.69

Free swing

Heavy-duty Floor Bearing Pivot with flat tapered spindle.

Close

Adjustable Top Door Patch Fitting

N/A out of 5
CAD $118.92

Top gate patch fittings are used with all of our gate and door pivots. It fits in the upper corner of the gate's glass panel, and requires a hole and cut-out in the glass. Comes complete with instructions and a glass cut-out template. Features a 2-3/4" (70 mm) pivot setback.