Showing all 14 results

Show sidebar
Close

180° Round Mall Front Clamp

N/A out of 5
CAD $40.35

This 180° round mall front clamp is commonly used in malls to join two vertical interior glass panels. The front of the clamp attaches with two flat head Phillips screws (included). Suggested minimum gap between tempered glass panels is 7/32" (5.6 mm). This clamp provides rigidity to reduce flexing when pressure is applied. It also serves as an indicator to alert pedestrians of a panel's presence in dimly lit areas.

Close

135° Inside or Outside Clamp

N/A out of 5
CAD $40.15

For mall glass

The perfect solution for heavy storefront glass panels, designed to be installed at the top or bottom of the glass panels. Its transparency allows to discreetly connect panels. 135° angle clamp covering the inner and outer part. Optimal solution for any installation requiring an unparalleled finish on all facades.

Close

135° Outside Clamp

N/A out of 5
CAD $30.69

For mall glass

The perfect solution for storefront glass panels, designed to be installed at the top or bottom of the glass panels. Its transparency allows to discreetly connect panels. The 135° angle clamp hides the outside part only. A rectangular plate is used to hold the interior part.

Close

180° Straight Clamp

N/A out of 5
CAD $26.84

For mall glass

The perfect solution for storefront glass panels, designed to be installed at the top, middle, or bottom of the glass panels. Its transparency allows to discreetly connect panels.

Close

Round Mall Clamp

N/A out of 5
CAD $74.62

90° outside

Commonly used in malls for joining vertical interior lites of glass. 90 degree round mall front clamp is installed using Very Hi-Bond Tape and or silicone. It joins vertical glass wall panels set at right angles and provides rigidity to reduce flexing when pressure is applied. They also serve as floating indicators to alert pedestrians of a panel's presence in dimly lit areas.

Close

Mini Mall Front Seam Clamp

N/A out of 5
CAD $30.01CAD $50.12

Glass drilling required for use

Solid brass construction, designer plated on all sides for optimum appearance. Perfect for joining vertical interior panels of heavy glass in malls.For use with 3/8" to 1/2" (10 to 12 mm) tempered glass

Close

90° Lap Joint Clamp

N/A out of 5
CAD $32.36

For mall glass

The perfect solution for heavy storefront glass panels, designed to be installed only at the top or bottom of the glass panels. Its transparency allows to discreetly connect panels. It's the optimal solution for an installation to create a corner junction between two perpendicular glass panels.

Close

Wall Mount Mall Clamp

N/A out of 5
CAD $62.29CAD $97.60

Semi-circular

Commonly used in malls for joining vertical interior lites of glass to walls.

Close

Corner Clamp for Commercial Glass Front

N/A out of 5
CAD $41.15CAD $47.98

90° Outside

Commonly used in malls for joining vertical interior lites of glass. Easily joins vertical glass wall panels set at right angles and provides rigidity to reduce flexing when pressure is applied. Also serve as floating indicators to alert pedestrians of a panel's presence in dimly lit areas.

Close

Outside Corner Mall Front Clamp, 135° angle

N/A out of 5
CAD $42.67CAD $48.97

Length: 60 mm

Clamp commonly used in malls for joining vertical glass wall panels. This clamp adds stiffness so as to limit the bending caused by the application of pressure. It can also be used as floating indicators to alert pedestrians of the panel's presence in poorly lit areas.

Close

180° Round Clamp

N/A out of 5
CAD $18.57

For Mall Glass

The perfect solution for storefront glass panels, designed to be installed at the top, middle, or bottom of the glass panels. Its transparency allows to discreetly connect panels. This clamp hides the exterior and interior parts.

Close

Wall Mount Mall Clamp

N/A out of 5
CAD $76.89CAD $142.83

Square

Commonly used in malls for joining vertical interior lites of glass to walls. For 3/8" to 1/2" (10 to 12 mm) thick tempered glass.

Close

Mall Clamp/Seam Clip

N/A out of 5
CAD $26.41CAD $27.03

Round seam clip commonly used in shower door and office frameless glass systems.

Close

Square Clamp for Glass Mall Front

N/A out of 5
CAD $20.30CAD $25.32

2" x 2" (50.8 mm x 50.8 mm)

Glass clamp commonly used to join vertical glass panels in shopping mall applications. They can also serve as floating indicators to alert pedestrians of a panel's presence in dimly lit areas. Features two screws rather than one single clamping screw, providing more stability.