Thermoplastic, Elastomeric Glass and Siding Sealant
Tremco 830 is a one-part, thermoplastic elastomer that provides a high-performance, flexible seal in glazing and siding applications. Not for use in the United States.
One-component, elastomeric, gun-grade polyurethane sealant
MasterSeal NP 1 is a one-component, high performance, non-priming, gun-grade, elastomeric polyurethane sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.PRODUCT HIGHLIGHTS * One-component formula requires no mixing, helping to reduce labor costs * Joint movement capability ±35% provides excellent flexibility for keeping moving joints weathertight * Easy to gun and tool, speeding up application and making neater joints * A vailable in ProPaks, reducing jobsite waste, lowering disposal costs * 12 standard colors to match a wide variety of common substrates * No primer required for most construction materials lowering installation costs * Weather resistant for long-lasting weathertight seals * Wide temperature application range makes MasterSeal NP 1 suitable for all climates * Compatible with non-rigid coatings and can be painted * Superior holding power for long-lasting roof tile installation * UL listed; Passes 4--hour, 4--inch, fire and hose stream test when used with Ultra Block or mineral wool * Suitable for water immersion with documented performance in wet areas * Meets VOC requirements in all 50 states
Highly adhesive flexible sealant
Formulated from a blend of polymers to produce a highly adhesive flexible sealant specifically developed for use as a building joint sealant. Formulated to produce 100% cohesive failure in peel adhesion tests on a variety of typical substrates.For interior/exterior joints that have up to +/- 40% joint movement and may be periodically immersed in water. For use in sealing, caulking and glazing applications on substrates of glass, metal, concrete, wood, vinyl and masonry. Specifically recommended for perimeter caulking of windows, doors, panels, panel to panel joints, frames, toe, cap, and heel beads and back bedding
Multipurpose thermoplastic sealant, for professional use only
Super-durable thermoplastic architectural sealing compound. Dries by solvent evaporation. Top quality thermoplastic rubber based sealant by Mulco Professional sealant for windows and siding. Super flexible, super adherent, and super durable. Adheres to almost any surface. Can stretch up to 1400% without breaking.
High Performance, High Movement Polyurethane Sealant
Dymonic® 100 is a high performance, medium-modulus, low-VOC, UV-stable, non-sag polyurethane sealant. Formulated with an innovative polymer technology similar to TREMproof® 250GC and Vulkem® 45 SSL, Dymonic 100 is a highly versatile sealant that far surpasses the movement capability of competitive products and has the unique ability to adhere to damp and green concrete.Dymonic 100 has a skin time of 2 hours with a tack-free time of 6-8 hours to significantly reduce dirt pickup. It has a movement capability of +100/-50% in typical field conditions, is paintable and will not crack, craze or yellow under extreme UV exposure. It is also jet fuel resistant.
Waterproof, window, door and trim sealant
DAP® DYNAFLEX 230® delivers a "silicone tough" latex formulation for outstanding exterior performance against the elements. Developed for flexibility and crack proof performance, this sealant endures expansion and contraction without cracking or losing its seal. The paintable, durable sealant can fill gaps up to 25.4 cm (1") wide and the cured sealant is mold and mildew resistant. It has excellent adhesion to a wide range of building materials including wood, MDF, PVC, polystyrene and composite trimboard.
General Purpose Butyl Sealant
Butyl Sealant is formulated from a blend of butyl rubber and polyisobutylene to form an economical, flexible sealant.
Advanced Polymer Sealant
XtraBond®9500 is a multi-purpose advanced polymer sealant. The product's one component design ensures that it cures rapidly when exposed to atmospheric moisture to form a durable bond and can be applied in a wide range of temperature and weather conditions (-40° F to 140° F). It is engineered to deliver aggressive adhesion with the most common construction substrates while ensuring complete compatibility -- even with rubberized asphalt flashing and other flexible plastic building materials. These unique features make it the sealant of choice for professionals everywhere.
Bakor POLYBITUME 570-05 Polymer Modified Sealing Compound is a top quality, high solids, rubber asphalt caulking and sealing compound formulated to provide extra flexibility and good bond.
To seal gutters
NuFlex® 110 Butyl Rubber Caulk and Gutter Seal is a single-component solvent release butyl formulated for excellent exterior weathering properties. NuFlex® 110 is designed for use on many dissimilar building surfaces. Our best narrow-bead sealant, this product is ideal for sealing gutter down spouts, metal storm windows, doors and lap joints. Adheres well to damp surfaces.
Siding, Window, and Door Sealant
Titebond® WeatherMasterTM Sealant has been specifically formulated to outperform all other sealant technologies, including silicone, tripolymer, and urethane. This superior polymer formula provides the best possible performance on siding, windows, doors, and vents. In addition to offering permanent flexibility, it provides unbeatable adhesion to wood, masonry, PVC, fiber cement, siding/trim, and most common building materials. If touch-ups are necessary, it may be painted with a water-based (latex-based) paint one hour after application. *It is weather-resistant, extrudes in extreme weather conditions and is UV-resistant, making it the ideal choice for exterior applications. Safety is not compromised, as this sealant contains no solvents or isocyanates and is VOC-compliant.
One-component, controlled flow, solvent release sealant designed to seal mechanically fixed joints. After solvent release, this sealant exhibits a tough ductile mass that fulfills the sealant requirements of recreational vehicles, window manufacturing, cargo trailers and manufactured home sealant details.
Sealant for construction joints subject to dynamic joint movement
BES Sealant is a premium, moisture cure, medium modulus sealant for construction joints subject to dynamic joint movement. This one-part, low odor, moisture cure product provides excellent weather resistance, flexibility, very low VOC, through the use of a silyl-terminated polyether polymer (STPe). Upon curing, can be painted with latex-based paints. This product is fully compatible with Henry/Bakor air barrier, flashing, roofing and waterproofing membrane components of Henry/Bakor's Building Envelope Systems®.
Universal Construction Sealant
Sikaflex® AT-Connection is a one-component, moisture-curing elastic sealant based on hybrid polyurethane. Ideal for connection and perimeter joints between porous and non-porous substrates, specifically PVC windows and doors. Sikaflex® AT-Connection is odourless and solvent-free, suitable for both interior and exterior use.
Ideal for dynamically moving joints
Dymonic® is a high performance, low modulus, one-component, moisture curing, modified polyurethane joint sealant.It is specifically designed for sealing dynamically moving joints such as: expansion and control joints, precast concrete panel joints, tilt-up panel joints, curtain wall joints and perimeter caulking (windows, doors, panels, radon mitigation, bedding of mullions, frames, etc.). Dymonic® exhibits tenacious adhesion which will not diminish over product life. This unique weather resistant formulation possesses a balanced adhesive strength, low modulus, and high recovery, making it ideal to withstand the following adverse conditions common to such installations: moisture, movement, shear, and deflection.
One-Component Adhesive Sealant
Sikaflex®-221 is a high-quality, multi-purpose, non-sag one-component polyurethane sealant that cures on exposure to atmospheric humidity to form a durable elastomer. It meets ASTM C920 approvals and Federal Specifications TT-S-00230C. Sikaflex®-221 has been tested and classified in accordance with ANSI/UL 723 "Test for Surface Burning Characteristics of Building Materials". Sikaflex®-221 is manufactured in accordance with ISO 9001 and ISO 14001 Quality Assurance Systems.
Fast-Curing, Low-Modulus Hybrid Sealant
Dymonic® FC is a low-modulus, one-component, moisture-cure, polyurethane hybrid sealant formulated with proprietary silane end-capped polymer technology. Dymonic FC provides the best performance characteristics of polyurethane and silicone sealants.Dymonic® FC is a durable and flexible sealant specifically designed to seal moving dynamic joints. Does not require priming on most materials and offers tenacious adhesion once fully cured. It is fast curing with a skin time of 60 minutes and a tack-free time of 3-4 hours to significantly reduce dirt pickup.