Showing all 6 results

Show sidebar
Close

180° Glass to Glass Clamp

N/A out of 5
CAD $14.93CAD $18.33
Made of solid brass. No glass fabrication required. Includes clear gaskets and mounting screws. No-Drill fixed panel clamps allow securing of fixed panels of glass, but only under certain circumstances. Use monolithic tempered glass Made of solid brass, and available in numerous stock finishes, these no-drill fixed panel clamps provide an alternative to clamps requiring drilled holes or notches in the glass. Two nylon tipped set screws are tightened to secure the glass. Mounting screws are also provided for the wall/ceiling/floor. Silicone must also be used for reinforcement along 'all-glass' edges where clamps are used.
Close

Wall Mount “Sleeve Over” Glass Clamp – Right Side

N/A out of 5
CAD $17.68
For 5/16" to 1/2" (8 to 12 mm) thick glass. Solid brass. Secured to glass with set screws. Assists with shear forces. Holds glass panels in position while sealant cures. Right-handed as viewed from outside shower. Use monolithic tempered glass. Sleeve over glass clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws.
Close

135° “Sleeve Over” Glass Clamp

N/A out of 5
CAD $31.89
For 5/16" to 1/2" (8 to 12 mm) thick glass. Solid brass. Secured to glass with set screws. Assists with shear forces. Holds glass panels in position while sealant cures. Use monolithic tempered glass.

Sleeve over glass clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws.

Close

Wall Mount “Sleeve Over” Glass Clamp – Left Side

N/A out of 5
CAD $17.68
Solid brass. Secured to glass with set screws. Assists with shear forces. Holds glass panels in position while sealant cures. Left-handed as viewed from outside shower. Use monolithic tempered glass. Sleeve over glass clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws.
Close

Glass Clamp for Ceiling or Wall Mount

N/A out of 5
CAD $13.30CAD $16.02
For 5/16" to 1/2" (8 to 12 mm) thick glass. Solid brass. Secured to glass with set screws. Assists with shear forces. Holds glass panels in position while sealant cures. Use monolithic tempered glass.

Sleeve over glass clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws.

Close

90° “Sleeve Over” Glass Clamp

N/A out of 5
CAD $30.46
For 5/16" to 1/2" (8 to 12 mm) thick glass. Solid brass. Secured to glass with set screws. Assists with shear forces. Holds glass panels in position while sealant cures. Use monolithic tempered glass.

Sleeve over glass clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws.