180° Glass-to-Glass Adjustable Hinge – Round Series
Adjustable to any angle ip to 90 degrees without removing door. Available in several beautiful finishes. Three-year warranty. Adjustable 180 degrees glass-to-glass. Use monolithic tempered glass
Adjustment to accommodate the desired angle (up to 90 degrees) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closed position. The door can swing 90 degrees inward and also 90 degrees outward (adjusting angle from factory set position will reduce 90-degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degrees inside the shower area, thus having the door close snugly against the jamb.
|Height||3-1/2″ (89 mm)|
|Width||2-3/16″ (56 mm)|
|Shipping Weight||2 lb (907g)|
USING TWO HINGES
With 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28″ (711 mm).
USING THREE HINGES
With 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32″ (813 mm).
Glass Thickness: 5/16″ (8 mm) to 1/2″ (12 mm) Tempered Safety Glass
Special Feature: Adjustable to any angle up to 90 degrees without having to take door down.
Construction: Solid Brass
Hinge Swings: 90 degrees in and 90 degrees out (at factory set position).
Closing Type: Self-Centering when within 15 degrees of closed position.
Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Gasket Pack must be purchased separately for use with 5/16″ (8 mm) thick tempered glass.
NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles. Call for details.
Custom finishes are available on request. Contact us.
Brushed Nickel, Chrome, Polished Chrome