180° Glass-to-Glass Regular Hinge – Round Series
Self-centering with reversible 5-degree pivot pin. Available in several beautiful finishes. Three-year warranty. 180-degree glass-to-glass standard model (factory-set for standard closing position). Use monolithic tempered glass
This hinge has radius corners and beveled edges for a sleek appearance. Hinges accommodate 5/16″ (8 mm) to 1/2″ (12 mm) thick tempered safety glass and are self-centering when within 15 degrees of the closed position. Hinges are constructed of solid brass, and have stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. This type of hinge also contains a reversible 5-degree pivot pin. A custom pivot pin is also available for “off-angle” installations.
|Height||3-1/2″ (89 mm)|
|Width||2-3/16″ (56 mm)|
|Shipping Weight||2 lb (907g)|
STANDARD REVERSIBLE PIVOT PIN
Each hinge contains a reversible pivot pin. One side of the pin is marked at 90 degrees. The opposite side of the pin is marked 85 degrees. Hinges come with the 90-degree side activated. The pin can be rotated (not flipped upside down) to activate the other side.
CUSTOM PIVOT PIN
Custom pivot pins are available to accommodate “off-angle” installations. As an example, you may encounter a wall that will not meet your door at 90 degrees. If the standard 5-degree pivot pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a custom pivot pin (up to 45 degrees).
USING TWO HINGES
With 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28″ (711 mm).
USING THREE HINGES
With 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32″ (813 mm).
Glass Thickness: 5/16″ (8 mm) to 1/2″ (12 mm) Tempered Safety Glass
Construction: Solid Brass
Hinge Swings: 90 degree in and 90 degree out
Closing Type: Self-Centering when within 15 degrees of closed position
Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Gasket Pack must be purchased separately for use with 5/16″ (8 mm) thick tempered glass.
Brushed Nickel, Chrome, Matte Black, Polished Chrome